Over the past two days I have tried to figure out why the job will end suddenly after starting and the fact that you can not run multiple routers without it ending as well. I have made a basic job to copy IOS files to flash memory on Cisco routers. What is happening is the job is ending, even though the transfer started on the TFTP server. The only ones it seems not to affect is full T1 connections, they will launch and finish with no issues. Fractional lines down to 512 will start one transfer on the job list but finish the rest of them even though they start on the TFTP server. Anything 256-56k will start TFTP transfer, but the job will stop them after about 15 seconds. I have tried adding a delay to the end of the Job and adding a show command but still get the same response.
To also knock out the TFTP server as the issue I can log on to each router and start the job individualy and the TFTP server will run till the job is compleate. I have successfuly launched 5 connections at one time with no issues. The only time it fails is through the job prompt. Is there a setting or command I need to add to allow more time so the job can finish before shutting down?
Here is the script I am running for the transfer.
copy tftp: flash:
10.101.XXX.XXX
c1900-universalk9-mz.SPA.152-4.M6a.bin
c1900-universalk9-mz.SPA.152-4.M6a.bin
And I tried this version to see if it would work better.
copy tftp: flash:
10.101.XXX.XXX
c1900-universalk9-mz.SPA.152-4.M6a.bin
c1900-universalk9-mz.SPA.152-4.M6a.bin
${Delay:18000}
sho arp
All send me the same response from NCM
Job Engine: SRVNPM
6/27/2014 2:30:05 AM : Started YYYYYYYYYY: JobDescription_x
Execute Command Script on Devices
2 devices selected
11111111 (10.102.252.174):
--------------
copy tftp: flash:
--------------
--------------
10.101.152.87
--------------
Address or name of remote host []?
--------------
c1900-universalk9-mz.SPA.152-4.M6a.bin
--------------
Source filename []?
--------------
c1900-universalk9-mz.SPA.152-4.M6a.bin
--------------
Destination filename []?
Accessing tftp://10.101.152.87/c1900-universalk9-mz.SPA.152-4.M6a.bin...
___________________________________________________________________________
222222 (10.102.251.158):
--------------
copy tftp: flash:
--------------
--------------
10.101.152.87
--------------
Address or name of remote host []?
--------------
c1900-universalk9-mz.SPA.152-4.M6a.bin
--------------
Source filename []?
--------------
c1900-universalk9-mz.SPA.152-4.M6a.bin
--------------
Destination filename []?
Accessing tftp://10.101.152.87/c1900-universalk9-mz.SPA.152-4.M6a.bin...
___________________________________________________________________________
6/27/2014 2:30:35 AM : Completed YYYYYYYYY : JobDescription_x; Devices : 2 ; Errors : 0
Execution time : 30 seconds
___________________________________________________________________________
"Yes I did Change some things to Protect the innocent - LOL"