Hello,
I'm attempting to get NCM to copy firmware images to Cisco switches, but it is timing out during the copy. The template is attached, and the trace is attached (initial SCP command removed for security reasons).
The SCP server is remote to the site, and the switch can reach it. The file starts copying, but the template times out and NCM disconnects from the switch prematurely. Because the switch doesn't return to a prompt after the file copy begins, it never begins the Delay command.
Cisco switches use a series of exclamation marks to delineate chunks on the file transfer, and this switch shows one every 500KB. Based on the transfer speed, this is about once every 27 seconds, and as the global SSH prompt timeout is 15 seconds I believe this is my issue.
Is there a way to modify the SSH prompt timeout for the duration of a template, or trigger the wait command with the copy command? I would like to avoid modifying the global timeout if possible, as that will affect the other non-Cisco devices.
Thanks!