Re: How to upgrad Cisco 1941 router ?
sophiawood goodzhere is a professional NCM Configuration Templates builder specializing in Upgrading Cisco Devices. He is included here and would be the best resource for any type of upgrading...
View ArticleFrom CONFIGS->Config Management page, We are not able to download vlan...
In NCM, We are trying to download the following configurations from our switch, *running config *startup config *show interface *show vlan *show vlan group *show lag We were...
View ArticleComparison Criteria exclusion doesn't work
Hi, I'm trying to exclude line with date of my comparison criteria but for now it doesn't seems to works. my configs looks like : ## Tue Sep 08 00:20:45 2015 CEST# box type : VSP-8284XSQ#...
View ArticleRe: Comparison Criteria exclusion doesn't work
Make it easier on yourself, at least for a test case. Simply use the GUI and select *2015* as the line to ignore, and then test it. Older versions required you to stop/start NCM to get it to apply...
View ArticleConnection refused by device during the autobackup
Hi everyone, I am experiencing the problem "Connection refused by device (SRX240 and somemore) " when I try to backup the configs on to NCM. I am able to login to NCM server and telnet to SRX240....
View ArticleClik here to view.
Re: NCM help with duplicate IP in a router config?
You are correct in both cases, that there is a duplicate IP address finder in UDT and that you can set an alert to find them based on SYSLOG messages. However, in BOTH cases I don't believe it will...
View ArticleRe: Download config from Alcatel 7750 & 7450
Jiri...I have 30 X 7210SASM into my environment and I was wondering if you can help me to create the config change templates. I have the most updated solar winds products. Also in my environment I do...
View ArticleRe: How to upgrad Cisco 1941 router ?
sophiawoodDo you have NCM to do the upgrade with?
View ArticleClik here to view.
Re: How to upgrad Cisco 1941 router ?
Hmm... Maybe I'm interpreting the question differently, but it sounds like they're asking how to actually do install it? The process is quite simple, just unplug the router, plug the module into...
View ArticleUsing NCM to backup a SEL-2032 or SEL-3530 RTAC
Has anyone tried using NCM to backup a SEL-2032 or SEL-3530 RTAC switch? Theses are industrial devices made by Schweitzer. The devices support telnet and ssh.
View ArticleClik here to view.
Re: NCM help with duplicate IP in a router config?
her her is problem we just run into 2 Cisco switches with the same Ip ...switch A send trap that there PSU is downthe Ip is resolved to switch B host name!!!!so you ssh to switch B there is no PSU...
View ArticleClik here to view.
Network Configuration Manager - Connection Profile - any way to recover...
Network Configuration Manager is properly configured to back up a device, and is able to do so. I am the new network guy, no one seems to have credentials for this device, except NCM. Is there any way...
View ArticleClik here to view.
Re: Network Configuration Manager - Connection Profile - any way to recover...
Hi, There's no way to recover stored passwords. In fact, such possibility would be a security hole that wouldn't be tolerated by many other customers. Regards,Jiri
View ArticleClik here to view.
Re: NCM - Cisco running and startup configuration comparison error;...
I would be very interested in hearing the resolution to this situation myself. I recently noticed that our NCM comparison exclusions are not working either. I have been playing with them today and...
View ArticleRe: NCM help with duplicate IP in a router config?
Syslog will give an error on interfaces that aren't monitored in Solarwinds, So if the 2 devices can see each other, won't syslog report the duplicate IP address?
View ArticleRe: NCM help with duplicate IP in a router config?
sja wrote: her her is problem we just run into 2 Cisco switches with the same Ip ...switch A send trap that there PSU is downthe Ip is resolved to switch B host name!!!!so you ssh to switch B there is...
View ArticleRe: NCM help with duplicate IP in a router config?
If the IP address conflict was from two devices on the same L2 network segment or LAN and looks something like this:%IP-4-DUPADDR: Duplicate address A.B.C.D on Ethernet0/0, sourced by xxxx.xxxx.xxxxThe...
View ArticleNCM RTN - use IP in syslog message body not source
Hello, We use a syslog aggregator, so all the syslog from our network devices get sent to Solarwinds and appear from a single source IP. This is reflected in the "Hostname" field on the Syslog viewer....
View ArticleRe: NCM RTN - use IP in syslog message body not source
There is no option on the forwarder to keep the original IP? Like on syslog-ng there is the keep-hostname() option that allows you to do that...
View ArticleRe: NCM RTN - use IP in syslog message body not source
To add-on to this comment, Craig is correct; retaining the Originating IP Address is something the Syslog Aggregator should (the NPM/SAM/NCM Syslog/Trap and Kiwi Syslog can do this) be able to do so...
View Article