Re: Backup Riverbed to NCM
Hmm...sounds like the Riverbed is working fine. Have you examined the session trace for the connection attempt through NCM? Just in case you haven't done that before: 1. Go to NCM Settings >...
View ArticleRe: Re: Need to create report to get ip's of phones in Vlan's on switches...
Hello, It should be: AND (ArpTables.MAC LIKE '00809f%') after your Filter Results (look at screenshot with notepad). Regards,Mateusz
View ArticleRe: Downloading Cisco CUE configurations
Hi Zack - I think the issue may be that you are trying to run two commands on the same line of the template. Without having a CUE to test with I can't be definite, but I'd expect the template to have...
View ArticleRe: Downloading Cisco CUE configurations
I thought about that as well, but separating the string will remove the functionality that I am wanting. End result should be that I create the device template and assign it to specific devices, create...
View ArticleClik here to view.
Re: Downloading Cisco CUE configurations
I'm not sure, but I think this will still do what you want. If you take the example of the ACE Device Template created by Jiri Cvachovec at http://thwack.solarwinds.com/docs/DOC-170787 it pretty much...
View ArticleStartup and running configs, RTCD on Cisco ASAs
In order to get around the whole hidden passwords thing for Cisco ASAs I've modified my template to run "more system:running-config" instead. This, however, causes problems for the startup config as...
View ArticleRe: Startup and running configs, RTCD on Cisco ASAs
I forgot to mention: if I can define two different methods, one for getting startup configs and one for getting running configs, that would fix this. That way we could leave the running config method...
View ArticleClik here to view.
Re: Backup Riverbed to NCM
On the web interface, you may check Configure > Security > Management ACL that you don't have something there that block ssh from the NCM box. And in NCM, make sure you have an enable password...
View ArticleRe: Startup and running configs, RTCD on Cisco ASAs
For some reason it's not letting me reply to your comment, so here I am: Yeah, the key was using the ${StorageFilename} variable in the template. If you don't use that then the devices just try to use...
View ArticleRe: Send Real time change detection emails to different addresses based on...
I've just found this on another thread so please disregard as this has already been answered: You can send Config Change Detection emails to different users by performing the steps below:Set up a new...
View ArticleRegular Expression Help
Hi I’m trying to find my line listed below by searching for the words load average to ignore it in the NCM - Comparison Criteria.With each config download the time change so it must ignore everything...
View ArticleRe: Startup and running configs, RTCD on Cisco ASAs
Try uploading the file here: http://thwack.solarwinds.com/document/upload.jspa?containerType=14&containerID=2019
View ArticleRe: Startup and running configs, RTCD on Cisco ASAs
Template: http://thwack.solarwinds.com/servlet/JiveServlet/downloadBody/172297-102-1-9529/template.txt
View ArticleRe: Orion NCM Integrated Web Site Error
Hi: in windows 2008 server (any version) you have to give full permissions on the iis directory (C:\inetpub) to IIS_IUSRS and IUSR users. This could solve this problem
View ArticleUsing NCM template for Cisco span (monitor) port configuration ?
I did not see a template in relation to config of cisco ios monitor sessions (span) - does anyone know if this possible and better- if it might be possible to include a port picker like the vlan...
View ArticleRe: Regular Expression Help
Hello, Try to use: .*,\s\sload average: \s - stands for whitechar (e.g. spacebar, tab) EDIT: Not working for me, trying to find solution... Regards,Mateusz
View ArticleClik here to view.
Ignore Last Configuration change line
We are having a problem where we are getting an e-mail every time the "! Last Configuration change by" line at the top of our Cisco devices changes. This changes every time our management device logs...
View ArticleRe: Ignore Last Configuration change line
its working for us - my RegEx Pattern is simply ^! Last (and nothing else). maybe delete it and re-add it?
View ArticleRe: Using NCM template for Cisco span (monitor) port configuration ?
Hi, Definitely possible, just a case of having two parameters: @Source_int and @destination_int and then selecting them when you run the script. Regards, John
View Article