Re: NCM: ignore all white space in config file comparison
What kind of devices are that? It could help others with the same problem. Lab on device templates is a good idea. Thanks,Jiri
View ArticleRe: NCM comparison criteria not working.
Jeff, Looking at your question after I took a step back, I know the root cause.Config comparison in NCM works with individual lines -- exactly like the diff tool.That means you canot create a regex to...
View ArticleRe: NCM: ignore all white space in config file comparison
These are really old SMC switches TigerStack-II's I think... their CLI is really slow: you can see it backspacing over the --More-- prompts that it reminds me of 1200bps teletype consoles.
View ArticleRe: SolarWinds NCM v7.2 is Now Available!
In looking at these release notes, I noticed that PA devices are now supported natively. Is that full support of all features and functionality? We have PAs here and are looking to back up configs, but...
View ArticleRe: Not able to download configs using local (Non-Active Directory)
The answer to this issue: 1) When adding the Node to NPM, select User for Login Credentials. 2) Create a User Level Login Credential (Settings>NCM...
View ArticleRe: SolarWinds NCM v7.2 is Now Available!
Hi Scott Sadlocha, Yes, you can backup Palo Alto with 7.2 (newest 7.2.2 now).You can test it by downloading eval version installing on a different machine than your production NCM.Please let me know...
View ArticleClik here to view.
Edit machine type in NCM node details
I ran network discovery on our IP range and it pulled all our devices. However, we have several Red Hat servers and NCM did not pull up the node name and machine type and listed it as "unknown". I...
View ArticleRe: Edit machine type in NCM node details
Normally when I see that, the SNMP string failed and the scan picked up the host by ICMP. Make sure SNMP is enabled in Linux and rescan. Once SNMP is working, you should see better results
View ArticleClik here to view.
Compliance Policy Report - Detailed Results
I am trying to create a policy to confirm that my edge interfaces are configured to standard. I have the policy working and by correcting the config on the switch, I can clear the alert on the...
View ArticleClik here to view.
Re: Compliance Policy Report - Detailed Results
I'd like to see a report like this but my results just show the rules match somewhere in the file. Anyone know how to get the result below?
View ArticleRe: Executing Script in Schedule Job
I'm trying to do much the same thing but I run into a problem when trying to set up the scheduled job. In the "Notifications" tab, when specifying the pathname for saving the file, as soon as I put in...
View ArticleRe: SolarWinds NCM v7.2 is Now Available!
Thanks much for the info Jiri. I think we are going to look at upgrading here (currently on 7.1.1) and taking it from there. I will let you know how it goes, whenever we get it done.
View ArticleRe: Policy Reporter - CIS Compliance
Hello Callahan, Have you managed to create or secure this policy reporter yet? Thanks
View ArticleRe: ATT Netgates
It was an ATT Netgate. I talked to the vendor and they said that name that comes across is net-snmp.
View ArticleClik here to view.
Re: Seeking NCM template for HP Procurve 4000M switches
did you get a template for the 4000m? -- I'm looking at trying to build one and its menu/CLI is odd... Richard
View ArticleClik here to view.
Re: Report to show media type
This can be done in NCM - simply create a Execute Script Job with the following parameters: "sh int status | in tx" or "sh int status | in sx" and select the nodes you want it applied to.
View ArticleRe: Transfer Status stuck in NCM
I have the same issue, could you please advise which user mean and how to give him the required permissions. Many Thanks
View ArticleRe: Removing a node from NCM but not NPM
Uh, yeah... Marie; ... the Unmanaging and Remanaging Nodes was page 73(document), physical page 91... and uh; I'm going to need you to come in on Saturday to finish those TPS reports. yeah
View Article