Re: Cisco image upgrade
its pretty easy to do. just copy the ios onto the directory you have setup for your tftp server. via command line copy the ios to the device (you could also do this via script in ncm if you have...
View ArticleClik here to view.
Re: Cisco image upgrade
As tonyled stated, it is all scripted. In NCM, you "execute" that script. The contents of the script are the same commands you would use execute via CLI. Your NCM server is already a TFTP server as...
View ArticleClik here to view.
Re: Cisco 37XX Stack - bad password. Prompted twice for Password
Hi William,thanks for your Input, unfortunately we are not in charge of the actual config of the switches, sometimes the switch admin can not set the suggested settings due to compliance regulations....
View ArticleRe: Set Custom Property based on configuration
Jeppe, just to get the task accomplished this is what I would do. Run a report looking for the configuration lineExport to excel the result of the reportDelete anything that the rule did not match from...
View Articleinstall type
I have NCM 7.2 and need to move to standalone version. The NCM is installed on NPM server now and is integrated. I could not find how to do this in guide. Is it possible to do this and can I use...
View ArticleRe: install type
Hi jaisonterai, What is the ultimate goal of the migration? Do you want to have NCM completely standalone, decoupled from NPM (also in the Wen UI)? Regards,Jiri
View ArticleCarriage Returns when copying config files
Does anyone know how to get around having carriage returns/line breaks in the NCM configuration files? When I view the config file in NCM, and then I copy the text. When I paste the text to notepad,...
View ArticleRe: Carriage Returns when copying config files
Hi, This is a known issue (internal #243071), but it depends on the browser. The workarounds are e.g.Use Chrome or other browser it works in.Go to Edit config page, copy the config and paste it to a...
View ArticleClik here to view.
Re: Carriage Returns when copying config files
Thank you. And yes it was IE. I used Firefox and had no issues. Hopefully it will be working in IE soon.
View ArticleRe: How to get a darn single line to match and show up in your report as a...
thanks for the awesome tutorial on Regex. As I am learning, it is great to have examples to be able to piece the code together.thanks,CourtesyIT
View ArticleClik here to view.
Re: Backing up a Radware Appdirector (runing config that is)
in fact, it is suffisant to remove the following line of the radware template : <Command Name="AllocatePty" Value="False"/>
View Articleis iOS v15.x supported?
Hello, I know that FSM does not support iOS v15.x What about NCM? I'm looking to manage a few 4506, 2960, 3750x, 2811, 2901, ASA 5510, ASA5512 and most of those devices are running v15... Thanks in...
View ArticleRe: is iOS v15.x supported?
Hi planglois, The key question is whether any command(s) to display configuration (like show running-config) changed. (Looking at info on v15, it doesn't seem to be that case.)If not, then NCM...
View ArticleIssue while running a script
I've just run a script across a number of 3750's and on all but one of them I get the following error message -Transfer failure due to connection interrupt during execute script. I've checked the...
View ArticleRe: Comparison critera with "and"?
Jiri, Any luck with this? I can see how it would also be useful to be able to say "Don't show me the Last Configuration change by line unless something else in the config has changed" -- typically...
View ArticleSQL 2008 R2 Express problem
Hello,We are experiencing a problem trying to move our Orion database from the SQL 2008 R2 Express instance to a different SQL 2008 server. We were told that would alleviate some of the network...
View ArticleClik here to view.
Re: SQL 2008 R2 Express problem
Long story short? Painfully. Here are a couple links that will assist:The database was backed up on a server running version 10.50.1600. That version is incompatible with this server SQL SER…How to...
View ArticleI need to decommision a node and have it removed from SolarWinds
So I am looking high and low on how to remove a node/device from Solar winds the proper way to ensure alerts aren't going off when I shut the device down... Can anyone direct me in the correct...
View ArticleRe: I need to decommision a node and have it removed from SolarWinds
manage nodes, check box next to node, click delete, then confirm...?
View Article