Help with Config Change Script
I am obviously new to any kind of programming or scripting and I am beating my head against a wall trying to figure this out. Below is a config change template I've created to create a new Loopback...
View ArticleClik here to view.
Re: Help with Config Change Script
Well, not only that, but even if I manually input the IP address, the script returns no output.
View ArticleRe: Connectivity issues, discarding configuration (or configuration is too...
Hi sir Thanks for the reply I'll the session Tracing and the switches are H3C-A5120-24P-EI. Thank you.
View ArticleRe: Connectivity issues, discarding configuration (or configuration is too...
Can you confirm your device template being used (you can confirm using the test button and show connection details on the edit node page. IF your device template does not include the equivalent to...
View ArticleNCM: Allied Telesis switches
Is there an existing discussion regarding NCM that address the issues in Allied Telesis switches? Thanks.
View ArticleRe: Connectivity issues, discarding configuration (or configuration is too...
hi sir as I verify the show connection this is what I get. Please below information. Thank you very much. ----- Connection Profile: 3com -----Device Template: Generic-1.3.6.1.4.1...
View ArticleRe: Connectivity issues, discarding configuration (or configuration is too...
Hi nikkodumapit, What model is your H3C device exactly?According to the output above, NCM tries to use a generic template for the device. That won't work.Please try one of the H3C templates available...
View ArticleRe: upgrade to 7.3 - are we losing a poller?
One think you to consider. NCM does not poll at the same rate as NPM. In particular NCM is only pulling data when either a job kicks off to pull configs or if you have real time config change...
View ArticleRe: Cisco ASA Multiple Context backup with NCM 7.2.2 (What has changed?)
Hi jvoisin. Firstly I am sorry but I don't have any help for you regarding the issues you've had since upgrading to 7.2.2. We are upgrading to that soon so will probably share your pain then! I have a...
View ArticleProblems with Inventory and 7.3?
I've started having problems with Inventory since moving to 7.3 and I'm trying to figure out how to diagnose what the problem might be, but I'm not seeing anything in the web interface that might help...
View ArticleRe: Help with Config Change Script
Well, got it to work. script CreateLoopbackInterface (NCM.Nodes @ContextNode, string @LoopbackSubnet){{ string @ThirdOctet string @LoopbackIP string @ip @ip = @ContextNode.AgentIP @ThirdOctet =...
View ArticleClik here to view.
Re: Problems with Inventory and 7.3?
Did some searching on my own. Looks like in the NCM settings there are 2 settings that allow you to see what's going on. "Scheduled Jobs" and "Inventory Monitor". Both of them produce logfiles in...
View ArticleNCM 7.3 where did "number of saved configs" setting go to
We just recently upgraded to NCM 7.3. Prior to 7.3 there was a setting that let the user set the number of stored configs settings. Can't find that anywhere now
View ArticleClik here to view.
Re: NCM 7.3 where did "number of saved configs" setting go to
Hi jeffnorton, This is controlled by the maintenance jobs since NCM 7.2: Regards,Jiri
View ArticleRe: NCM 7.3 where did "number of saved configs" setting go to
Thanks. I just remembered that and have just this minute changed the job setting. I also realized when I did that, that since NCM is now distributed across all the pollers that the storage...
View ArticleRe: NCM 7.3 where did "number of saved configs" setting go to
Understood. Instead of having per-poller directory settings, wouldn't it be easier for you to store the job results to a shared drive? By the way, if you have concerns about disk space, I recommend not...
View ArticleRe: A solution to multi-context config download with NCM (Cisco ASA, FWSM...)
My understanding of the idea of creating a new config type is so that NCM knows where to store the downloaded config in its repository. Am I correct in saying this? eg if it has downloaded a config...
View ArticleClik here to view.
Re: A solution to multi-context config download with NCM (Cisco ASA, FWSM...)
Hi noobes, Your hypotheses are mostly correct. Let me add some details. NCM handles the storage of downloaded configs automatically. You don't have to worry about that. Create a new config type,...
View ArticleRe: Where in NCM 7.3 can I sort nodes by connection profile?
Is there a need for me to make an idea or is this simple enough to add as a feature request?
View ArticleRe: Where in NCM 7.3 can I sort nodes by connection profile?
A new voting Idea would better for visibility (i.e. better for you). Jiri
View Article