Re: Upload Config - Minimum Requirements?
I would expect the following would be required: IP address matching that of the failed device (or a 'build' IP that SolarWinds can route to)Interface configured correctly to allow traffic from the...
View ArticleRe: NCM configs backup results
Looks like your email relay is expecting TLS, rather than SSL connection. Switch the security for your local email relay to use TLS and it should work.
View ArticleRe: Download configs from Juniper SRX
Yes, I only have one Solarwinds server that would be connecting to the Juniper devices. NCM can successful download configs from other non-Juniper devices
View ArticleClik here to view.
Re: Download configs from Juniper SRX
sja I Can see that you use root as login username...that mean local no radius user ,you need to type cli to get to the junos OSthat could be the problem? That was definitely the problem. I created...
View ArticleClik here to view.
NCM "Word Wrapping" when reading configs and storing 1 long line as multiple...
Anybody else experiencing this issue? I Googled a bit and didn't seem to find anything. Basically what happens is NCM reads in a config, and it's almost like it uses notepad with word wrap enabled-...
View ArticleRe: NCM "Word Wrapping" when reading configs and storing 1 long line as...
Hmm.... I've had a couple of network engineers comment that what they're seeing in NCM is not the exact same config but as I'm a novice network engineer and haven't got access to the actual devices to...
View ArticleClik here to view.
Purging Old Archive Configs?
I noticed our NCM (7.0.2) server was running low on disk space and found that we had 38GB of files going back to 2011 in "C:\Program Files (x86)\SolarWinds\Configuration Management\Config-Archive"....
View ArticleRe: String Arrays in NCM
I created a pseudo array using setoct. The function will accept more than 20 octets with letters or numbers well beyond 255. string @VLANControlint @dVLANValueint @dVLAN1int @dVLAN100int @dVLAN101int...
View ArticleClik here to view.
Re: String Arrays in NCM
Editor stopped working. //Testing results and code. string @VLANControl16 = getoctet (@VLANControl,16)string @VLANControl17 = getoctet (@VLANControl,17)CLI {! @VLANControl1 @VLANControl2...
View ArticleRe: Downloading configs from HP ProCurve Switch 5412zl
Thought i'd update this just in case someone is searching and having the same issue... logging in via putty, and doing show run was also an issue, so it would sh some of the running config, but then...
View ArticleRe: Purging Old Archive Configs?
Bit of Threadnomancy here, but have a look at this: Config-Archive cleanup/purge Whilst these were developed for v6, the scripts may still be of use.
View ArticleClik here to view.
Re: Purging Old Archive Configs?
Or upgrade to a newer version of NCM and get the config archaive maintenance job by default: I don't remember in wich version exactly we added this job, but I think it would be 7.2.Please also note...
View ArticleInstalling NCM on second polling engine
We have an integrated setup with NPM 10.7, IPAM 3.1.1 and NCM 7.1.1 on the primary server/polling engine. (Yes we are a little behind). We have a second polling engine and need to install NCM on it,...
View ArticleRe: Purging Old Archive Configs?
Thanks. We are planning on beginning our upgrade of our environment next week. We will be upgrading to 7.2.2 for sure next week.
View ArticleRe: Purging Old Archive Configs?
I have a similar issue where I want to store configs for as long as possible, but when it comes time to free up disk space, the search for configs takes an eternity (not finishing in the space of an...
View ArticleClik here to view.
Re: Purging Old Archive Configs?
Jiri, Sure would like to see option to "purge all configs prior to last baseline config" added in vNext.
View ArticleRe: Installing NCM on second polling engine
Hi dale.miller@dot.iowa.gov, What do you have installed on the APE currently? You'll need to ensure that your modules are compatible.
View Articletelnet or ssh
Hi I need to know how to make report that show which network devices use ssh or telnet to provide CLI As per audit I want to listdown those devices which use telnet Also need to make report that...
View ArticleJustification for Extensive Security and frequent Auditing
Just wanted to share this for those of us who haven't spotted it yet. Looks like some future security related job openings will be available in California soon, and something else to look for in...
View Article