Re: Average SNMP values from different nodes
So I have all of my pollers (34) for the temp sensors setup.I created a new Transform with a formula of avg({rPDU2SensorTempHumidityStatusTempF})/10 If I assign the transform to a node I get the...
View ArticleRe: Primary Poller and addition pollers (NPM and NCM) clearification
Agreed with HolyGuacamole. Pre v7.4, you will need to copy any custom templates (default out-of-the-box ones will be installed with the additional polling engine). From v7.4 onward, you do not need to...
View ArticleRe: Config compare running versus startup
For some older Cisco Switches e.g. 3550, 3750 cisco names the ssh .cer file like this: hostname#1234.cerWhen solarwinds comes to this part of the startup-config, it thinks it is at the command prompt...
View ArticleClik here to view.
Re: Config compare running versus startup
Forgot one point: 1. delete "crypto pki trustpoint"2. delete the .cer file in nvram3. then rename the switch to something else4. then create the ssh key and do a write5. then rename the switch back to...
View ArticleRe: NCM - how do I backup a node via intermidient device ?
I'm also curious about this what about devices connected through terminal servers (Cyclades) as well? I'm sure someone has done this somehow before. Can NCM do something like this?
View ArticleRe: NCM help with duplicate IP in a router config?
Ok, I actually have this set up as a resource on a page that I have for looking for unusual things. For this to work, the IP would actually have to be "active", ie: not on a shutdown interface I...
View ArticleRe: NCM - how do I backup a node via intermidient device ?
I think someone needs to do a feature request for this. I'm not really if it is still on the radar. I know that it has been asked for before. NCM and Accessing Devices through Terminal Servers.Is...
View ArticleClik here to view.
Re: NCM only allow to execute Config Change Templates on specific interfaces
For those that read a lot of my posts, going to sound like a broken record, but this looks like a job for the "Compliance" portion of NCM, not the Config Change Template portion. By using the "Config...
View ArticleRe: NCM - how do I backup a node via intermidient device ?
Just FYI, I passed this along to the inimitable Dez and she's pretty sure NCM *can* do this - NCM supports TACACS and other "in the middle" systems. Look for more info coming soon.
View ArticleExpect/WaitFor in a script instead of Delay
Does the scripting language for NCM have an expect/wait for function as opposed to the Delay function?
View ArticleRe: NCM - how do I backup a node via intermidient device ?
Well, I'm pretty sure NCM *cannot* do this -- it's a feature request and NCM engineering team confirmed that. Jiri
View ArticleF5 backup configuration
Hi Guys, Can anyone tell me if NCM can download the F5 .ucs and do version control? I know that the .ucs is a binary type file. So can anyone tell me if it can be done, if so, is there any...
View ArticleClik here to view.
Re: Expect/WaitFor in a script instead of Delay
Nope, that would be a feature request. There already may be one. Please check Network Configuration Manager Feature Requests. Jiri
View ArticleRe: NCM - how do I backup a node via intermidient device ?
Thanks Jiri. I thought so. It would be very beneficial to have this capability.
View ArticleNCM job completion notification emails not being received from 2 pollers
we have network devices dsitributed across 4 pollers ( 1 primary and 3 additional). we are running a NCM nightly backup config job daily to download the running config from devicea dn job completion...
View ArticleRe: How to exclude filtered keywords in report writer
Below is the link to the template Microsoft OneDrive - Access files anywhere. Create docs with free Office Online.
View ArticleClik here to view.
Re: How to exclude filtered keywords in report writer
Your template was slightly different from your initial post. In any case, it looks like you should be using the 'not all' option for the second filter group.I have attached the modified template as per...
View ArticleRe: NCM help with duplicate IP in a router config?
Hi Craig Thanks for sharing it's sure find some stuffI will sure like something from MCM part that take and compare the config text and come with list of interfaces. /SJA
View ArticleClik here to view.
Re: How to exclude filtered keywords in report writer
That did it. I appreciate all your help. by using "not all" solved it
View Article