Re: Compliance Report, Summarize & Count Multiple Violations Per Device
Thank you so much! Your explanation was really helpful. Best wishes.Sergey
View ArticleClik here to view.
Re: How to exclude filtered keywords in report writer
Clicked / saved but still still shows
View ArticleLooking for help creating first configuration check policy
I want to create a policy to check "IP helper addresses", but I am struggling with the logic. Basically, I am only interested in interfaces that already have "ip helper" configured, so IF "ip...
View ArticleRe: Looking for help creating first configuration check policy
So you can search within the config under block sections so you can start say at Vlan 200 to something after your last Vlan implementation. More on this is a step by step and RegEX guide here ~Dez
View ArticleClik here to view.
Re: Looking for help creating first configuration check policy
This is a great post by Dez who just happens to be a SolarWinds Rockstar Fairy and all knowing NCM Guru! That should help get you going, and if not, feel free to post back to the thread and we'll try...
View ArticleRe: Looking for help creating first configuration check policy
If I understand your reply, it requires that I skip the check for VLAN100, but I do not have that option in my environment. We use a variety of different interfaces (including non-SVI's/non-VLAN's). My...
View ArticleClik here to view.
Re: Looking for help creating first configuration check policy
You are able to do this within your rules on your compliance using the search all config or blocks. You can even place strings using and or etc so you can hone down what you need to be alerted to your...
View ArticleClik here to view.
Re: How to exclude filtered keywords in report writer
Can you export the report template and attach to the reply?
View ArticleRe: Looking for help creating first configuration check policy
Unfortunately I don't think this helps me (unless I am just too dense to see it); it seems to be a limitation in the matching logic capabilities for the tool. I am getting 100's of false positives....
View ArticleClik here to view.
Re: NCM template for Transition switches
Nope, I do have just over 150 switches with 3 different models and some of them I'm able to test connection on NCM and other none at all. I had tried different aproach to no avail. Ended up writing the...
View ArticleAverage SNMP values from different nodes
Hello, I have several nodes polling temperature sensors in our datacenter. Then I have mapped those temp sensor values to a map to display on the main page of Orion. What I would like to do next is...
View ArticleRe: Average SNMP values from different nodes
Assuming you are using UnDP to poll, have you tried the "Universal Device Poller Summary Min/Max/Average Chart"
View ArticleRe: Average SNMP values from different nodes
I had not thought of that. It does work. Is this the only way to display the average of that UnDP poll?
View ArticleRe: Average SNMP values from different nodes
Could probably get creative and come up with some custom SWQL or SQL to display but little difficult to do w/o knowing the UnDP's right off hand.
View ArticleUsing NCM to download firewall contexts
I know there have been several discussions on how to backup multi-context ASA firewalls. I am pretty sure I can script this.loginenablechangeto system contextshow context list send to NCM copy...
View ArticleClik here to view.
Re: Average SNMP values from different nodes
I believe you can create all of your pollers, then use UnDP transforms to average out one poll cycle. All UnDP pollers will have to be on the same time frequency, say, every 5 mins.
View ArticlePrimary Poller and addition pollers (NPM and NCM) clearification
I got two different opposite answers from Solarwinds support on question. I logged a call with support and asked when you additional pollers is there any configuration need to be transfer over from the...
View ArticleRe: Primary Poller and addition pollers (NPM and NCM) clearification
HI John I quite sure that if you build a custom template on your primary server It's will stay only on that server (NCM 7.3)Not sure about the 7.4
View ArticleRe: Primary Poller and addition pollers (NPM and NCM) clearification
In NCM v7.3 and prior, the device templates are on the file system. If you have a custom template, the polling engine will need a copy of it on it's server to utilize the template. So, you will need to...
View ArticleRe: Creating a whole New "instance" of Solarwinds
Rick Thank you so much for your response, I apologize for taking so long to reply. I got so busy. I will definitely use your suggestion.
View Article