NCUA Policy Reports?
Hi All, I work for the Credit Union industry governed by the National Credit Union Association (NCUA), which is a federal insurance agency not too dissimilar from the FDIC. It is a different governing...
View ArticleClik here to view.
Re: connect to ASA 5520 using NCM
Thank you for posting this, and it worked changing from "enable 15" to just "enable". I was stumped why NCM seemed to be connecting successfully, but not downloading the config with the "connection...
View ArticleRe: Download both running and startup configs on RTCD?
Hi gljb77, It's a feature request: http://thwack.solarwinds.com/ideas/3274 Regards,Jiri
View ArticleRe: Creating rules through NCM Policy
You need to user parentheses to make make rules inclusive of eachother, like above do you want (rule2 or rule3) or do you want (rule 1 and rule 2) or rule 3 or rule 4. Hopefully this makes sense to...
View ArticleHow to create Config Change Template to remove a command from SVI interfaces...
Hi, I wanted to know if anyone has configured a change template to remove a command from SVI (Switch Virtual Interfaces) on Cisco Layer 3 switches. I want to be able to remove a command from all...
View ArticleRe: NCM scripts dont run on devices configured to Polling Engines
Just checked the NCM settings. I have additional polling engines checked under the Polling Engine Configuration for NCM. I have to run the scripts off the polling engines as I have a firewall between...
View ArticleRe: NCUA Policy Reports?
Hi Jiri, I'm finalizing my Orion/NTA/NCM/Device Tracker implementation at the moment (getting the MAC addresses identified in DT, ensuring all configs are backed up, etc.) All my alerts and flows are...
View ArticleRe: NCM scripts dont run on devices configured to Polling Engines
Make sure that the target nodes are native the the originating engine. For example:Polling Engine A has Router1Polling Engine B has Firewall3 Any script(s) that run against Router1 MUST be run from...
View ArticleClik here to view.
Re: Unable to remove node from NCM
I have a backup job that runs every week and it keeps looking for 2 nodes (ORLSW47 & 48) and of course failing. I followed the instructions above but it keeps re-adding 2 nodes that are no longer...
View ArticleRe: How can I get a true configuration from a Cisco ASA and WLC?
Hi Jiri, I tried the WiSM template and was able to retrieve the configuration using TFTP and SSH for the login. I am not successful with the ASA, though, and I'm using NCM 7.2.2 and ASA 8.4. If...
View ArticleRe: NCM scripts dont run on devices configured to Polling Engines
How do you run a script from a polling engine? Maybe that is what I am doing wrong. I am going under Config to Configuration Manager. Selecting Execute Script and entering my script. When I hit...
View ArticleClik here to view.
Config Change Report - Compare more recent downloaded running to last...
I want to setup a scheduled config change report that will always compare the more recently downloaded running to the last downloaded running. The important nuance here is that it is always running to...
View Articlehow to input y or yes when meet the prompt
Dear, Teamhow can input the y or yes when the prompt waiting??plz see the following logs plz SWTelnetDebug log.txtGot 83 bytesWARNING: This command will reboot the system Do you want to continue? (y/n)...
View Articleis anybody can tell to me how to using the configmgmt-command
Dear, Teami found following directories from the ncm installation folderC:\Program Files\SolarWinds\Orion\NCM\DeviceTypesthere are several configmgmt-command there.how can i using when i want to reboot...
View ArticleMultilink error reporting
I have multiple sites that have their routers into a multilink, both 28xx and 29xx cisco series. What I have noticed is that although our individual T1s along with the multilink are being pulled into...
View ArticleRe: how to input y or yes when meet the prompt
Can you just add a y {CR$} to the next line in the script?
View ArticleRe: is anybody can tell to me how to using the configmgmt-command
These files are templates for storing configuration files, they are not for running scripts. I would suggest you read the administrators guide on how to run scripts on devices and then post here if you...
View ArticleClik here to view.
Arris MG5225G (Media Gateway), NCM to Manage configs
We need to prove a case, being able to manage customer configs for Arris MG5225G (Media Gateway) devices, using NCM to do so. We are able to monitor the device(s) within NPM, however, we are not having...
View ArticleRe: Transfer Status stuck
Upgrade to v7.2.2 solved my problem to clear the stuck transfers, tech support recommended that I do the following:Use the database manager on the Orion Server. Start - All Programs - SolarWinds Orion...
View ArticleBackup ASA Config using TFTP with Inside address
I prefer to back up my ASA Firewall configs using TFTP since it shows the PSKs for VPN. I can tftp the configs from my remote ASA5505s connected by VPN, but I need to modify the tftp command to use...
View Article