Clik here to view.
Re: Config comparison with Nexus 1000v switches
Hi Andy - Thanks for the response, I've been playing around with similar settings to the ones you've suggested, but because some of the lines are of interest for other types of interface (i.e....
View Articleneed assistance creating a script to update my physical interfaces
hello, I am new to scripting and I was wondering if someone could help to create a script or point me to one I can use update the phyiscal interfaces on difference models of Cisco IOS switches with qos...
View ArticleRe: RTCD for HP Procurve
I'm trying to do the same using either syslog or SNMPv3 but failing as well. I can get the switch to generate a syslog message only after the "write mem" command is issued. I've also been...
View ArticleRe: need help! asap! Linux Download and Uploading a config file
For those of you on current versions on NCM (I'm on 7.1.1), the DeviceType access works differently now. You can no longer create Device Types from the NCM GUI. You must use the web console. The web...
View ArticleNCM Script Enquiry - The use of IF, Greater Than and Equals on the output of...
Hi All I have a particular scenario and hoping NCM can help us out. I'm not certain its NCM as I want to run this script from the Web Interface as a remediation script. I would be happy to run it...
View ArticleRe: RTCD for HP Procurve
Thank you for responding, that is unfortunate that they don't have a mechanism. I guess the best I can do at this point is look to alert through NCM when it downloads the config and maybe alert if it...
View ArticleDelay for Config Change Template
Is there a way to set a delay between commands that are sent using a NCM Config Change Template? I am having an issue with NX-OS devices that prompt for "yes"s or file names, etc and it doesnt get the...
View ArticleRe: Delay for Config Change Template
Hi, It's not available in 7.0.2 but this is one of the planned enhancements of 7.2. This version is currently in Beta phase -- you can join the beta program if you want.You can find the information...
View ArticleModify Field object properties
I'm trying to modify 'Field' properties in Orion Report Writer. The problem I have is that one of the Fields called 'description' pulls up information from Cisco devices (Cisco command: show version)...
View ArticleRe: NCM Script Enquiry - The use of IF, Greater Than and Equals on the output...
Well I don't know that is supports an if then else based upon CLI output exactly. However I believe the end result can be acheived via the NCM Policy Reporter. You could create a policy that has a...
View ArticleForgot NCM Password
Hello AllWhen I try to login to NCM, it gives me error message that the user account details are incorrect. May be I forgot the NCM password.How can I reset the NCM password?
View ArticleRe: Use NCM config change template to remove non-standard syslog servers
Tim,If variables are not needed use "Execute Scripts" from the configuration management page.Enter the commands starting wtih "config t"end the command with "end"Just like you would in the CLI.
View ArticleRe: Use NCM config change template to remove non-standard syslog servers
Thanks bcorgey but maybe I didn't explain the requirement properly. I want a script to configure 2x Syslog destinations AND to remove ANY other Syslog destinations that MAY have already been defined in...
View ArticleRe: Use NCM config change template to remove non-standard syslog servers
Tim,If all devices require this use a script as such: conf tno logginglogging 1.1.1.1logging 2.2.2.2endyou could use a compliance report to flag if logging established then execute a the remediation...
View ArticleRe: Config change report. Incorrect results.
It's difficult to tell without seeing the configs. Can you open a case and provide the configs to support?
View ArticleNCM scheduled download job runs continuously
Have not been able to locate a solution to a scheduled job running continuously. I recently updated a scheduled job that downloads all device configurations (running and startup) nightly. The job...
View ArticleRe: NCM scheduled download job runs continuously
I believe the default log location for NCM is C:\Program Files (x86)\SolarWinds\Orion\NCM\Logging . Check the logfile for the particular job and it should give you more information. You could also...
View ArticleLicensed Nodes Report
I am sure that I am overlooking this but is there not a report in report writer (or otherwise) that would give me a list of all my nodes, the nodes that are in NCM and licensed, and the nodes that are...
View ArticleRe: NCM scheduled download job runs continuously
Thanks, Branfarm. I reviewed the logs in that directory and found three files:general.log - Hasn't been updated since 2009scheduller.log - Nothing of interest; A few entries about the process being...
View ArticleReal-time change detection additional actions
I am looking for a way for a real-time change to do more than simply send an email. Ideally I would like it to trigger and Advanced Alert in NPM which I can then assign additional events and logic to....
View Article