Clik here to view.
Cannot pull config's from Adtran TA5000's
Hello everyone. I hope someone out there has ran in to this and found a fix for it. From NCM I can not get to the privileged level using the enable command because of what is being out put to the...
View ArticleClik here to view.
Re: Cannot pull config's from Adtran TA5000's
Can you post a screenshot of how the prompts look like from a Putty session?
View ArticleClik here to view.
Re: Can you make variables in a configuration change template optional?
I don't believe its possible to designate certain parameters as optional. What you could possibly do is make the users enter a fixed dummy value and provide descriptive parameter labels and sub-text....
View ArticleClik here to view.
Re: Connection Refused by IP
i'm not using putty but i'm telnet to the device and can connect
View ArticleRe: Re: Connection Refused by IP
Are you sure the first screenshot indicates a successful connection? It is just showing the SSH version. A successful connection should show you a prompt after which you can run commands like enable or...
View ArticleClik here to view.
Re: Re: Connection Refused by IP
okay i'll try using putty and i can connect to the devices like the capture below
View ArticleRe: Re: Connection Refused by IP
Interesting! Taking a closer look at the screenshot you posted on Nov 21, 2014 1:03 AM, it didn't even get to sending the user name and password. It maybe related to shorter keys as mentioned...
View ArticleHow to Manager (NCM) Cisco sExpress 50012TC & 50024PC switches ?
Hello NCM 7.2.How to Manager (NCM) Cisco sExpress 50012TC & 50024PC switches ? SNMP is Ok. but Login credentials ? Thank you
View ArticleSolarwinds - Script to forward logs to SolarWinds NCM server
I know the two commands I need to run are: snmp-server host 10.45.150.72 trap publiclogging 10.45.150.72 I don't know how to setup the script to accomplish this task Script will run on a Cisco 3548...
View ArticleRe: How to Manager (NCM) Cisco sExpress 50012TC & 50024PC switches ?
Sorry, what exactly are you asking about? Where to enter login credentials? Jiri
View ArticleRe: Config template customization
If the port configuration is only included in the text of the device config, then you cannot access it in a config change template. However if such parameter can be seen in one of the inventory...
View ArticleClik here to view.
Re: Comparison Criteria
Hey there Jiri! I went back to look at it today, all that needed to be in the the field was service internal, speed, txspeed, & rxspeed. All I needed to do was wait about 20 minutes and everything...
View ArticleRe: Connection Refused by IP
Hi Holy,So do have any suggestion?since our configuration is using ssh ver 2.But can you explain me " I vaguely recall that NCM doesn't like short keys" ?
View ArticleRe: Connection refused by router ( via SSH)
hi jswan,what do you mean about " I vaguely recall that NCM doesn't like short keys."i have same problem, all my configuration is using ssh ver 2.
View ArticleRe: Connection Refused by IP
It should be the modulus_size parameter in the crypto key command Cisco ASA 5500 Series Configuration Guide using the CLI, 8.2 - Configuring Management Access [Cisco ASA 5500-X Series Ne… check the...
View ArticleRe: Re: Connection Refused by IP
You may want to turn on Session tracing and see if the session trace files reveal anything Settings > NCM Settings> Advanced Settings> and tick “Enable Session Tracing” checkbox. afterwards go...
View ArticleClik here to view.
Re: Re: Connection Refused by IP
okay i will activated session trace.But i want to asked you. Do i must set same password on username and enable both on the Global Device Default and Connection Profile like my capture below?
View ArticleRe: Re: Connection Refused by IP
No, they can be different. You can use the global device defaults or a connection profile or explicitly enter credentials for an NCM node
View ArticleRe: Re: Connection Refused by IP
okay thanks,but do my enable password must same in the device to?
View Article