Re: Download config from Alcatel 7750 & 7450
Jiri,It's working perfectly for the SASMs. Thank you for your guidance.I have also several Alcatel Omniswitches 6850-48X and 6855-14X. Do this templates will work with these models ?
View ArticleRe: Download config from Alcatel 7750 & 7450
I'm not sure about the Omniswitches. Give it a try and come back if it doesn't work. Jiri
View ArticleClik here to view.
NCM-Startup / Running config conflicts on dell 6248 switches
The startup config is putting a number in front of every line, So every line shows as changed ?Any help would be great, thanks Guy Startup Config Running...
View ArticleRe: Can NCM compare one device config to another device config?
Did this ever make it as a feature request and/or is it now possible? Dan
View ArticleClik here to view.
Orion or Kiwi Cattools for capturing router Syslogs
We've been challenged to capture syslog messages from around 800 routers. It's a busy network and therefore we receive numerous messages. What we really need to do is alert on particular BGP messages...
View ArticleClik here to view.
Re: NCM "Word Wrapping" when reading configs and storing 1 long line as...
Some ideas come to mind--maybe you'll look into them and find something, maybe not. . . I'm open to the idea that this might be a "feature" of your version of NCM--which version are you using? I'm...
View ArticleRe: Orion or Kiwi Cattools for capturing router Syslogs
Both Kiwi and Orion NPM Syslog can do what you need. For Kiwi:1. Configure a router to send its syslog data to your Kiwi server2. Configure a Rule on Kiwi with an intuitive name3. Build a new Filter...
View ArticleRe: Compliance Reporting exact matches
You might try square brackets around your compliance criteria: [VLAN 2] could possibly be what you're looking for. A pretty useful RegEx doc can be downloaded here:...
View ArticleRe: Kiwi MAC Report in NCM
I'm following this thread--sounds interesting. I don't see that report in NPM, it'll be interesting to see if someone has a share or KB solution.
View ArticleRe: Node Groups where are they in NCM 7.4?
I might be confused about your goals, but here's what I'd try: 1. In NCM 7.4, build your script exactly how you'd implement it from the CLI. Do this in Configs > Script Management > Add new...
View ArticleRe: NCM Job Engine backup configs issue
Might there be multiple pollers involved? I have one "main" instance of NPM/NCM and multiple regional pollers. All regional pollers operate under a single job created on the main NPM/NCM server. When...
View ArticleRe: Orion or Kiwi Cattools for capturing router Syslogs
Thanks for the reply! I like the idea of using Kiwi as a "front end" to Orion. We've been concerned that the amount of messages coming directly into Orion could possibly take excessive resources to...
View ArticleClik here to view.
Trunk interface and their own mac address.
Hi all, I use NCM / NPM to monitor my network. i need to find mac address of all trunk ports in my network. and i want to automate this. how to automate this with NCM / NPM. ? though i can find it...
View ArticleRe: Trunk interface and their own mac address.
You'll need a different command to show the MAC address, which is why it may be helpful to create a report or create a policy. You might also have some good luck working with Cisco TAC to learn what...
View ArticleRe: NCM RTN - use IP in syslog message body not source
Thanks for all the advice. As we're going through a firewall, we can't really do IP spoofing and (after some other design considerations) can't move the syslog-ng to be alongside the NPM server....
View ArticleRe: Can NCM compare one device config to another device config?
Dan, One of the most important criteria for a feature to be implemented is its popularity. This request hasn't been popular enough to be included in a release yet. Jiri
View ArticleRe: NCM compatibility
Hey, in this threadcvachovecj explained that there isn't an official list of supported devices, and that generally if your devices have CLI support, NCM can manage them. Best way to check is to...
View ArticleRe: ＮＣＭ >設定 >ノード編集 > Connectionのテスト > Connection Profile > Testで失敗する
Hi, It's difficult to identify the problem without further information.Basic checks: Is this a multi-poller environment? If yes, is NCM additional poller installed on the server with polling engine to...
View ArticleRe: NCM compatibility
If the device doesn't work with NCM out of the box, I would look for a device template in Network Configuration Manager. (You can import the template directly from NCM 7.4 UI.) Jiri
View ArticleRe: ＮＣＭ >設定 >ノード編集 > Connectionのテスト > Connection Profile > Testで失敗する
Hi Jiri-san, Thank you for your response. Basic checks:Is this a multi-poller environment? If yes, is NCM additional poller installed on the server with polling engine to which this device is assigned...
View Article