Re: move ncm to new server
So in that case, I should upgrade on the existing server, then shut it down on the existing server, install on the new server and point it to the old database, correct? I'm assuming I'll need to do...
View ArticleRe: move ncm to new server
That route would be better, then all you need to do is use the license manager to release the license on the old server prior to shutting it down.
View ArticleRe: move ncm to new server
Thanks. I'll give it a shot sometime over the next couple of days and let you know how it turned out.
View ArticleRe: move ncm to new server
Also don't forget to move over any device templates you have modified / created as they are on disk. If you also store your config archive on the local disk you may want to move that folder as well.
View ArticleReporting on changes
Hello, I work in an environment where network device changes can be manual or automated and can come from a number of sources, some months we see hundreds of individual changes. NCM and RTN make...
View ArticleClik here to view.
Re: Reporting on changes
Off the top of my head, if you are using syslog messages, you could pull a report from those specific syslog messages over a given timeframe from report writer. It would have all the information you...
View ArticleRe: Interface Last Status Change Report Time/Date Problem
It looks like the top one is based on SNMP polling, not an actual calculation. So it noted it at the time it went down (I could be incorrect). The bottom report looks like a calculation.
View ArticleClik here to view.
Need to create Regex to find "ip http secure-server" but keep on finding "no...
I need to find what devices are running "ip http secure-server" on my network. To do so I have tried to create a policy report within this report is a policy I created containing a rule which searches...
View ArticleRe: Reporting on changes
Thinking about this, I'm wondering if I could take the time stamp from a config (change occurred and we pulled an updated config for RTN), select messages from the syslog db that have a near matching...
View ArticleRe: Where can I find the logs of jobs ran configured in and ran from NCM....
I have looked in the following location(C:\Program Files (x86)\SolarWinds\Orion\NCM\Logging)for a log of my job and I do not have anything there referencing such a job. All I have are two text files...
View ArticleRe: Where can I find the logs of jobs ran configured in and ran from NCM....
Please double check and make sure that the jobs have "Save results to a file" enabled as well.
View ArticleClik here to view.
Re: Where can I find the logs of jobs ran configured in and ran from NCM....
shack, I am attching the screenshots. Unfortunately, I do not have the newer version of NCM ( I have v7.1.1), but I am sure you will figure out where to find that in your version. The screenshot below...
View ArticleRe: Where can I find the logs of jobs ran configured in and ran from NCM....
Thanks. So I found out a few things…I updated my default SMTP server to a new server(that I know my questionable polling engine can communicate with). I did that by going to NCM Settings--->SMTP...
View ArticleRe: Where can I find the logs of jobs ran configured in and ran from NCM....
When you change SMTP global settings that takes effect only on the jobs you create after the change. The jobs created before that will still have the old settings. And you have to go and manually...
View ArticleClik here to view.
Re: Where can I find the logs of jobs ran configured in and ran from NCM....
See NPM Feature request for Global SMTP Server Setting at http://thwack.solarwinds.com/ideas/1286#comment-168702
View ArticleNeed help for Basic configuraton templates in cisco switch
How do i create the basic configuration templates in ncm for new switch and execute it. Please help
View ArticleClik here to view.
Cannot download running config - timeout problems
Since the upgrade to NCM 7.2.2, every day I am getting Cisco switch backup jobs with this error: ERROR: Cannot download Running config : Unable to Log into Router : Timeout. Device IP:xxx.xxx.xxx.xxx...
View ArticleRe: Cannot download running config - timeout problems
I'm in the same boat. Seems more and more that after doing SW updates, I spend time fixing issues. I'm up to 50% of my configs not backed up after the upgrade. Any ideas?
View ArticleRe: Need to create Regex to find "ip http secure-server" but keep on finding...
Use ^ip http secure-server\r*\n $ end character regex's do not work as the configs are not trimmed.
View ArticleRe: Device command template for HP's GbE2C switches?
This template work for me. I made it based on alteon with some modifications.
View Article