Re: Everything DISA STIGs for your Network
ecklerwr1, You are correct when apply DISA STIGs to the server. Most of the issue is focused around .NET and IIS. I always request a phased approcach to application of Server STIGs to my servers. I...
View ArticleClik here to view.
Re: Everything DISA STIGs for your Network
Thanks. The good news is I think since this is a new IS that everything can be installed without the STIG in effect first... I just don't want to break it all because looking at notes from another...
View ArticleUnable to access enable mode Device Template
Hello, I'm having an issue logging into a Adtan device due to the banner message before the CLI being to long and requiring the spacebar to be pressed (--MORE--) prompt. I tried changing the More...
View ArticleClik here to view.
Re: Device Comparison Overview ?
If you log onto the Solarwinds server and open Solarwinds Network Configuration Manager, you can easily select 2 configs (hold down shift as you select them) and then right click and select Compare...
View ArticleHow do I backup my configurations?
I recently watched Solarwinds Labs video #37 (Monitoring 101) and they mentioned the ability to backup the config from your devices. I went to one of my switches but the CONFIG tab wasn't there.How do...
View ArticleRe: How do I backup my configurations?
The Config tab is available when you have NCM, Network Configuration Manager. Worth the added costs!BSpencer
View ArticleRe: How do I backup my configurations?
Thank you. I don't have that module. I'll look into it.
View ArticleRe: Device Comparison Overview ?
Hi, Thanks for the reply; I don't have a problem with the usual device comparison side-by-side view, it's just that I remember some versions back there being another window alongside with a kind-of...
View ArticleClik here to view.
Re: Device Comparison Overview ?
In the GUI version on the Solarwinds server you get to see the coloured lines. So you can easily flick down to a "changed" section.
View ArticleRe: Config Change Templates generates no config
Yes, I will use that feature too!I have different production teams across Europe doing initial configurations of customer equipment by using Config Change Templates, since knowledge of CIsco cli is...
View ArticleNCM configs arhive check for config change.
Hi.We want to rearrange our archive of configs from devices. For this we want to keep only configs with changes. For example config is copied from device every day, but on device this config was not...
View ArticleCR and/or CRLF in Config Change Templates?
Hi all, I'm trying to run the following Config Change Template. The script validates as it is but I doesn't seem to generate the CR and/or CRLF that was inteded by just having a blank line after "no...
View ArticleNCM Config Backup works for some Cisco devices but not others. Same model,...
Hi, we are having some difficulty in getting some of our devices to properly download configs. I suspect it may be related to a login banner we have, but can't confirm. We have about 57 Cisco 2960's in...
View ArticleClik here to view.
Re: NCM Connector Error: unable to commit cds report request
Hi Jiri, I have managed to get access to the server that has previously been able to generate reports successfully I have managed to pull back reports for a particular customer by amending the string...
View ArticleRe: Unable to access enable mode Device Template
First, if possible, I would remove the banner from one of the Adtan devices and then try to see if that works. Then we know it's the banner, and not the device template. If that fixes the issue, then...
View ArticleTFTP timing out during config backup
I have 2 identical devices and am having mixed results when trying to backup configs. This is my device template that I am using for both <Configuration-Management Device="Fortinet FW 1500D"...
View ArticleClik here to view.
Upgraded NCM 7.4.1 Now Overnight Job failing - Got Wireless devices?
Have noticed since upgrading that it appears my nightly config reports are a bit light on nodes being checked ie: only the primary/core is running and notifying. SolarWinds Online Help for the...
View ArticleProxy Switch - Intermidient Device - anyone interested ?
I haven't seen a solution that works with NCM that will allow me to telnet 1 switch , provide user/pass and enable password, then it will telnet to the second switch.and then the SolarWinds NCM will...
View ArticleRe: NCM Config Backup works for some Cisco devices but not others. Same...
Yes I think it may be your banner is too long. What you can do is put some precommands into the device template and this help NCM wait a few more seconds before it trys to log in. Here is an example...
View ArticleFinding nodes with missing command
I have >350 nodes to search and I know how to search for the presence of a command like "ip access-group <ACLNAME> in", but I really need to find the nodes that this line is MISSING from. Any...
View Article